Method 1 (to achieve self-splitting effect):
Dilute the ink with thinner in a cup, pour onto the surface and wait until completely dry. No need to use a dryer.
Method 2 (to achieve standard alcohol inks look without self-splitting effect):
Pour ink on the surface and dry it with a dryer as you would do with a normal alcohol ink.
To enhance original delamination effect (which could be high, medium or low, as shown on a bar at the product sticker) you will need to add water to alcohol (70% should be alcohol and 30% - water).
Add Kamenskaya alcohol varnish to alcohol to provide extra protection for your painting.
Tips:
1. Inks with different degrees of separation do not mix together to create a third colour, they dry in two colours. This looks stunning, it’s worth trying it!
2. Inks of the same degree of layering work well together.
3. The inks work well with inks from other lines.
4. After drying coat the image with a few coats of spray acrylic varnish (not needed if you use Kamenskaya alcohol varnish).
5. Make sure that the surface you are working on is flat so that the drawing does not move away while drying.
Safety precautions: Work in ventilated areas, products are flammable, must be kept out of the reach of children and away from open sources of fire. Use strictly for the intended purpose. In case of contact with mucous membranes, rinse thoroughly with water and consult a doctor if necessary.
